HVACTools
Discover premium HVAC solutions designed for optimal performance.
Showing 17 professional HVAC products
Professional HVAC Products
Spun Copper Service Driers
The CU-620 belongs to the CU series of spun‐copper liquid‐line filter/driers manufactured by Emerson (also marketed under the Copeland/Alco/Emerson Flow Controls umbrella). Copeland +2 Baker Distributing +2 It is designed for installation in the liquid line of refrigeration or air-conditioning systems (i.e., downstream of the condenser, upstream of the expansion device) to protect the system by removing moisture, acids and particulate contamination. rathvac.com +1 Its housing is constructed entirely of copper, giving it enhanced corrosion resistance (especially useful in coastal, marine or other corrosive environments). Baker Distributing +1 The internal desiccant core is a 100% molecular sieve material, designed to adsorb water and acids in refrigerant systems using CFC, HCFC or HFC refrigerants. rathvac.com +1 Typical uses: replacement service part or original equipment installation in small‐to‐medium refrigeration/AC systems, especially where the environment may be aggressive (salt air, outdoor units).
Tube Bender
The Everwell CT‑368‑180A is a portable, hand‑operated tube (or tubing) bending tool designed for HVAC, refrigeration, plumbing, and mechanical applications. It is a 3‑in‑1 bender, meaning it can bend tubing of three common sizes: ¼", 5⁄16", and 3⁄8". It facilitates smooth bends up to 180°, allowing for tight U‑turns or coil shapes in tubing runs. The tool is often constructed of aluminum alloy for strength yet reduced weight, and is designed with an “open size” feature (i.e. the bender slips onto the tubing at any point) so you do not have to feed tubing through the tool from one end. It includes calibrated markings that allow you to produce accurate left bends, right bends, or offset bends to 180°, which is useful when routing tubing around obstacles or forming loops. It is commonly used by HVAC and refrigeration technicians to bend copper or aluminum tubing without kinking, flattening, or damaging the tube wall. Many listings emphasize that it can handle thin‑wall tubing (e.g. down to 0.4 mm wall thickness) without distortion. The Cooling Corner +2 The Cooling Corner +2
23 Precision Screwdriver Set
General Description Brand: Inland Set Includes: 23 precision screwdriver bits Handle: Ergonomic design for comfortable use Storage: Compact case with magnetic tray for organization Use Cases: Ideal for electronics repair, including smartphones, laptops, and other small devices
Wrench Cap
The C&D Valve B10-743 (also known as CD2250) is a brass wrench cap designed for use in refrigeration, HVAC, and air conditioning systems. It fits standard 1/4" SAE flare valves and provides a reliable seal while allowing easy valve access for maintenance and pressure testing. The wrench cap features a built-in core wrench tool on the top, which makes it convenient to remove or tighten the Schrader valve core without requiring a separate tool. It also has a neoprene O-ring that provides an effective seal to prevent refrigerant leaks and contamination. These caps are commonly used by HVAC technicians and contractors during installation, service, and repair work to protect valves and maintain system integrity.
Encapsulated Pressure Control Switch
The P100 Series encapsulated pressure control switches from Johnson Controls (PENN) are compact, pre-calibrated, non-adjustable switches designed to control and monitor pressure in refrigeration, air conditioning, and HVAC/R systems. These switches are commonly used for high- and low-pressure protection in compressors, receivers, accumulators, and other pressure-bearing HVAC components. They are factory-set to specific cut-in or cut-out pressures, with an encapsulated, tamper-resistant design that ensures stability, durability, and protection against environmental factors like dirt, dust, and moisture. Because they are not field-adjustable, they are ideal for OEM (original equipment manufacturer) installations where consistency and safety are critical.
Offset Ratchet Wrench
The Uniweld 70074 is a double‑ended, reversible offset ratchet wrench designed particularly for HVAC, refrigeration, and general mechanical service work. It features an offset (bent) profile to provide knuckle clearance in tight or confined spaces where a straight ratchet might interfere with surrounding components. uniweld.com +2 HVAC & Tools Direct +2 This tool is commonly used on valve stems (liquid, suction, service valves) and access valves, particularly on compressor and acetylene tank valves. fz.galpaexport.com +3 uniweld.com +3 The Retail Market +3 It’s intended to be a medium‑duty wrench for field service applications. MA Supply Company +3 Jackson Systems and Supply +3 HVAC & Tools Direct +3 The offset design helps reduce interference (i.e. hitting other components or obstructing access with your hands) while still giving good leverage and accessibility. MA Supply Company +3 A&R Supply +3 uniweld.com +3 Additionally, it comes bundled with a Dual Hex Wrench Adaptor (DHVA) that allows it to operate on hexagonal (6‑sided) liquid and suction valves that have 3/16″ or 5/16″ internal hex (Allen) fittings. MA Supply Company +4 HVAC & Tools Direct +4 uniweld.com +4
Flaring Tool Kit
The HANSUM kit is marketed as a “5‑in‑1” flaring / swaging / expansion kit intended for brake lines and HVAC / refrigeration tubing. It includes multiple parts: a flaring yoke (gantry), inch & metric clamps / flaring blocks, a pipe cutter, burr‑trimming (reaming) tool, and various dies / cones. The kit is stored in a blow-molded hard plastic case for organization, portability, and protection of parts. The kit is aimed at soft-metal tubing such as copper, brass, aluminum, and low-carbon steel. It is often used to produce 45° precision flares (i.e. single flare angle) on the ends of tubing. The flaring cone is described as an eccentric (off‑center) hardened steel cone designed to “roll” the metal outward, which helps ensure a more uniform flare wall and minimize uneven thickness or cracking. The advertised diameter range for tubing (outer diameter, OD) is commonly: ¼″, 5⁄16″, 3⁄8″, ½″, 5⁄8″, and ¾″ (i.e. ≈ 6 mm, 9 mm, 10 mm, 12 mm, 16 mm, 19 mm) Nellis Auction +2 Tiendamia +2 Some listings mention compatibility with HVAC / refrigeration / copper tubing work (i.e. not strictly automotive) in addition to brake line usage. Tiendamia +1
Welding and Cutting Equipment
The UW‑1515 is a portable welding & cutting kit designed for general maintenance, automotive, sculpture, refrigeration, etc. Uweld +2 Uwelders +2 Comes with: • 4 L oxygen cylinder Uweld +2 Uwelders +2 • 2 L acetylene cylinder Uweld +2 Uwelders +2 • Light‑duty oxygen regulator; light‑duty acetylene regulator Uweld +2 Uwelders +2 • Torch handle with cutting attachment, welding tip(s), twin hose (~4.5 m), spark lighter, tip cleaner, welding goggles, spanner, carry tote etc.
2in BLACK DUCT TAPE
BALCK TAPE
250 ft. 18/8 Brown Solid CU CL2 Thermostat Wire
This wire is highly regarded for its quality, strength, and ease of installation. It is perfect for use with thermostats and other applications. However, some customers find it expensive.
Glo -Stick 2E Universal/POE Fluorescent DYE
Prefilled disposable capsule allows dye to be injected into pressurized systems using refrigerant. Treats up to 5 to 9.9 lbs of refrigerant or 6 tons of cooling Fast and easy servicing Works in all systems, including high-pressure R-410A systems
Everwell CT-ST61A
The Everwell CT-ST61A is a 6-piece swaging tool drill bit kit designed for fast, precise, and reliable expansion of copper tubing. Compatible with both hard and soft copper, this tool set is ideal for HVAC, refrigeration, and plumbing applications. Its drill-bit design allows quick operation with a standard power drill, saving time and ensuring consistent results.
R‑454B REFRIGERANT
Opteon XL41 is a next-generation, low‑GWP refrigerant (R‑454B) designed as an environmentally friendly replacement for R‑410A. It offers comparable or even improved performance, with up to 78% lower global warming potential, while maintaining similar pressures and operational characteristics. This makes conversions from R‑410A systems straightforward and cost‑effective
PRO1 T805 - THERMOSTAT SINGLE STAGE
THERMOSTAT SINGLE STAGE 1 HEAT, 1 COOL ONLY BATTERY OR HARDWIRE, 7 DAY, 5/1/1 OR NON-PROGRAMMABLE
Durodyne Screws
Duro Dyne is a leading manufacturer of HVAC accessories and tools, offering high-quality solutions such as adhesives, sealants, duct connectors, insulation fasteners, fire dampers, access doors, and HVAC tools. Products are designed for durability, efficiency, and easy installation in residential, commercial, and industrial HVAC systems.
Tie Tensioning Tool with Manual Cut Off and Grips
Professional-grade cable tie tensioning tool with manual cut-off function. Designed to securely tighten and cleanly trim nylon ties used on fiberglass duct takeoffs. Manufactured in the USA by Malco Tools.
Rectorseal 86698 Novent Universal Locking Refrigerant Key
Multikey for Novent caps. Special tool designed to install and remove all Novent security caps used in HVAC refrigerant systems. Built with corrosion-resistant materials for maximum durability and precision.
Stay Ahead on HVAC Deals
Join our exclusive HVAC community for the latest parts, expert tips, and special offers.
Join 1,250+ HVAC professionals
Join Our Newsletter
Get exclusive HVAC updates