Pipes

3/4" PVC Union Coupling Pipe

The 3/4" PVC Union Coupling Pipe is a three-piece fitting designed to connect two sections of 3/4-inch PVC pipe while allowing easy disconnection and maintenance. It is ideal for irrigation, water supply lines, pool systems, and HVAC condensate drain lines, where sections may need to be removed or serviced without cutting the pipe. The union consists of two end connectors and a threaded nut that secures them together with a watertight seal. PVC (Polyvinyl Chloride) offers excellent corrosion resistance, lightweight durability, and chemical stability, making it suitable for use in both residential and commercial plumbing applications.

Minisplit Drain Tube

Flexible condensate drain tube designed for ductless mini-split and other air conditioning systems. It efficiently channels condensation water from the indoor unit to the designated drainage point, preventing leaks and water damage. The tube is lightweight, easy to install, and compatible with most standard 5/8″ mini-split drain fittings. Ideal for residential and light commercial HVAC systems.

16mmx160 MiniSlit Drain Line

The 230-DL16 is a condensate drain line (often called a “mini-split drain line” or “mini slit drain line”) designed for ductless HVAC / mini-split systems. Its purpose is to carry off condensation (water) generated by the evaporator / cooling coils in the indoor or outdoor unit, by gravity (i.e., without pressure). It is commonly supplied in a long roll (160 ft) and is cut to needed length in the field, with pre-marked cuts to facilitate installation. It is also made to resist kinking, clogging, and environmental degradation (e.g. UV exposure). It is used in installations where a dedicated drain line is needed for condensate removal in mini-split systems, often routed along the refrigerant line set or inside a cover to protect it.

7/8 COPPER ELBOW

1/2" Brass Valve

A ½" PSIG brass valve is a low-pressure-rated shut-off valve designed to control the flow of gas or liquid in piping systems operating up to ½ PSIG (0.5 pounds per square inch gauge pressure). These valves are most commonly found in residential and light commercial gas systems, where pressure requirements are low — such as in appliance gas lines (e.g., stoves, dryers, water heaters). Made of durable brass, these valves provide excellent corrosion resistance, thermal stability, and longevity in gas line applications. Most valves rated for ½ PSIG will comply with CSA or UL standards for gas use.

PVC Pipe 3/4" 10ft

The Conklin “PVC Pipe – Schedule 40 – 3/4ʺ × 10ʹ” is a rigid polyvinyl chloride (PVC) pipe used for fluid conveyance, venting, or general plumbing purposes. It is produced by Conklin Metal Industries. It comes in a 10‑foot length, and is commonly used where chemical resistance, corrosion mitigation, and relatively light weight are desirable. The pipe is useful in residential, commercial, and industrial systems for water, vent, or low-pressure applications, subject to its rating. Conklin also offers a variant labeled PVCP34TW which is “200 PSI – 3/4″ × 10ʹ,” indicating a higher pressure rating.

Clear Vinyl Tube

Clear vinyl tubing (also known as PVC tubing or flexible plastic tubing) is a lightweight, flexible, and transparent hose made from polyvinyl chloride (PVC). It's commonly used in low-pressure applications for fluid transfer, air lines, food processing, aquarium systems, and more. It’s valued for being: Clear/Transparent – allows visual inspection of flow Flexible – easy to route and install Lightweight – easier than rubber or metal tubing Non-toxic options available – suitable for potable water and food contact

GAS CONNECTOR 24" LENGTH

PVC Male Threaded Plug/Adapter 3/4

PVC Male Thread Plug – durable PVC fitting designed to close or seal the end of a female threaded pipe. Suitable for plumbing, irrigation, and HVAC drain line applications.

Black Iron 90 Degree Elbow-1/2in

The Conklin GBIE9012 ½‑inch Black Iron 90° Elbow is a robust malleable iron fitting designed to efficiently redirect pipe flow at a 90° angle. Featuring precision threading and industrial-grade durability, it’s engineered for seamless installation and maintenance flexibility in applications like gas, oil, steam, and heating systems.

Black Iron Union-1/2in

The Conklin 1/2-inch Black Iron Union is a durable malleable iron fitting designed for secure and reliable pipe connections. Built to withstand high pressure and temperature variations, this union allows easy disassembly for maintenance or replacement without cutting the pipe. Ideal for natural gas, oil, steam, and heating system applications.

1/2in x 8in Black Iron Nipple Size

BGBIN128 1/2in x 8in Black Iron Nipple is a high-quality black iron component designed for HVAC and construction applications. It ensures reliable performance and durability.

1/2in x 6in Black Iron Nipple Size

GBIN126 1/2in x 6in Black Iron Nipple is a high-quality black iron component designed for HVAC and construction applications. It ensures reliable performance and durability.

1/2in Black Iron Coupling

BGBIC12 1/2in Black Iron Coupling is a high-quality black iron component designed for HVAC and construction applications. It ensures reliable performance and durability.

3/4in PVC Slip Cap

PVCSC34 3/4in PVC Slip Cap is a high-quality pvc component designed for HVAC and construction applications. It ensures reliable performance and durability.

3/4in PVC Tee

PVCT34 3/4in PVC Tee is a high-quality pvc component designed for HVAC and construction applications. It ensures reliable performance and durability.

3/4in PVC Coupling

PVCC34 3/4in PVC Coupling is a high-quality pvc component designed for HVAC and construction applications. It ensures reliable performance and durability.

3/4in PVC 90 Degree Elbow

PVCE34 3/4in PVC 90 Degree Elbow is a high-quality pvc component designed for HVAC and construction applications. It ensures reliable performance and durability.

Flex Adapter Ball Valve 1/4" to 5/16" R-410a

Mastercool 90411 Flex Adapter Ball Valve connects 1/4" to 5/16" ports, specifically designed for use with R-410a refrigerant systems. A high-quality, durable fitting that ensures tight sealing and reliable operation in HVAC service applications. The Mastercool 90411 Flex Adapter Ball Valve is ideal for HVAC technicians working with R-410a systems. This flexible adapter converts 1/4" to 5/16" connections and includes a built-in ball valve for flow control. Made with durable materials for long service life. Compact design allows for use in tight spaces. Trusted by professionals for refrigerant handling tasks.

1/4" Female SAE Swivel w/ Core Depressor on Branch

1/4" Female SAE swivel fitting with core depressor on branch. Designed for HVAC and refrigeration applications to ensure leak-proof and efficient connections. Manufactured by JB (Just Better). The JB A31852 is a high-confidence fitting used in HVAC service applications. It features a 1/4" female SAE swivel and an integrated core depressor on the branch, ensuring quick and reliable connections. The item is brand new, in box, and inspected. Yellow tag classification. Comes with a 14-day money-back guarantee (less S&H).